{"product_id":"radial-engineering-proms2-stereo-line-isolator-with-transformer-isolation-and-level-control-1","title":"Radial Engineering ProMS2 Stereo Line Isolator with Transformer Isolation and Level Control","description":"\u003cp\u003eThe Radial Engineering ProMS2 is a professional passive microphone splitter designed to send a single microphone signal to multiple destinations simultaneously without introducing significant signal degradation or noise. Its Eclipse ET-MS10 transformer provides galvanic isolation on the isolated output, helping eliminate hum and buzz caused by ground loops while maintaining a wide frequency response and low distortion. The ProMS2 is well suited for live sound, recording, broadcast, theater, and other professional audio applications.\u003cimg src=\"https:\/\/www.radialeng.com\/wp-content\/uploads\/2018\/04\/Pro-MS2-hero.jpg\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe ProMS2 provides three output paths for flexible signal distribution. Direct-1 Thru connects to the main PA and provides a phantom-power return path to the microphone, while Direct-2 Thru can feed a monitor console or recording system. The transformer-isolated output provides additional noise rejection and can be used for recording or other isolated destinations. A ground lift disconnects pin 1 at the XLR Thru output, while the -30dB input pad allows +4dB line-level devices to be connected.\u003c\/p\u003e\n\u003cp\u003eBuilt into a rugged 14-gauge steel chassis and outer shell, the ProMS2 is designed for demanding professional use and features a protective book-end design around the jacks and switches. Its passive circuitry requires no external power, while the no-slip pad provides electrical and mechanical isolation and helps keep the unit securely positioned. With a 20Hz to 20kHz frequency response, greater than 140dB dynamic range, 0.001% THD, and +26dBu maximum input level, the ProMS2 provides a high-performance solution for splitting microphone signals on stage, in the studio, or in permanent installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Passive Microphone Splitter\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAudio Circuit Type:\u003c\/strong\u003e Passive\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTransformer:\u003c\/strong\u003e Eclipse ET-MS10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 20Hz to 20kHz (+0dB\/-1dB)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDynamic Range:\u003c\/strong\u003e \u0026gt;140dB\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGain:\u003c\/strong\u003e -0.5dB\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTotal Harmonic Distortion:\u003c\/strong\u003e 0.001%\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntermodulation Distortion:\u003c\/strong\u003e 0.003%\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhase Deviation:\u003c\/strong\u003e 1° at 20Hz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInput Impedance:\u003c\/strong\u003e Source Dependent\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOutput Impedance:\u003c\/strong\u003e Source Dependent\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon Mode Rejection Ratio\u003c\/strong\u003e: -115dB at 60Hz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNoise Floor: \u003c\/strong\u003e-140dB\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum Input\u003c\/strong\u003e: +26dBu\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInput Pad: \u003c\/strong\u003e-30dB\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInput Connector:\u003c\/strong\u003e XLR-F\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOutput Connectors:\u003c\/strong\u003e XLR-M\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirect-1 Thru: \u003c\/strong\u003ePhantom-Power Return Path\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirect-2 Thru:\u003c\/strong\u003e Alternate Direct Output\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIsolated Output:\u003c\/strong\u003e Transformer Isolated\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGround Lift:\u003c\/strong\u003e Pin-1 Ground Disconnect\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e 14-Gauge Steel Chassis and Outer Shell\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOperating Conditions:\u003c\/strong\u003e Dry Locations, 5°C to 40°C\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary Use:\u003c\/strong\u003e Live Sound, Recording, Broadcast, Monitoring, and Signal Splitting\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Weight:\u003c\/strong\u003e 1.80 lbs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Dimensions (L x W x D):\u003c\/strong\u003e 6.5\" x 4.25\" x 3.0\"\u003c\/p\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":71382824222973,"sku":"H-RADI-PROMS2","price":154.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/2308\/3005\/files\/2119735_99969574-59f3-4ea9-8448-94935106b990.jpg?v=1790346556","url":"https:\/\/hollywooddj.com\/es\/products\/radial-engineering-proms2-stereo-line-isolator-with-transformer-isolation-and-level-control-1","provider":"Hollywood DJ","version":"1.0","type":"link"}