BASSBOSS MFLA Dual 12″ Powered Line Array

Extraordinarily Powerful

Delivers a remarkable combination of flat frequency response, intense output, broad coverage and long throw.

Massive Output

The MFLA is a dual 12” line array element featuring dual 3” voice coil, 1.4” throat compression drivers, a 3000W amplifier and an integrated DSP. A 3000W RMS amplifier provides the MFLA with very high SPL capabilities and plenty of dynamic headroom. Low current draw and light weight relative to their output capacity means you can provide intense sound with less power and fewer boxes.

The comprehensive processing ensures consistent, undistorted high-SPL operation and maximum reliability. All the processing necessary for linear frequency response and phase coherent operation are pre-programmed into the DSP, delivering exceptional dynamic resolution and detail along with precise control.

Peace of Mind

The proprietary processing programmed into the BASSBOSS MFLA provide the ease of plug-and-play operation and very simple and easy setups. You also get the peace of mind that comes from knowing that the integrated limiters make the system capable of operating reliably at extremely high output levels.

Diffraction Matrix

The MFLA cabinet features innovations in performance and practicality. The forward output of the dual 12” woofers pass through a multi-aperture diffraction matrix that distributes mid-range energy evenly and in phase over the height of the cabinet. This matrix effectively reduces the acoustical source spacing to provide exceptional projection of mid-range frequencies. The matrix also shifts upper-midrange frequency output toward the center of the cabinet, which broadens the horizontal dispersion of the midrange frequencies.

This technology allows the MFLA to deliver coherent midrange propagation from a symmetrical 2-way design, which not only eliminates the phase offset, (or latency,) of a 3-way system, it also allows for higher midrange SPL and lighter cabinet construction. The shorter acoustical path of this system allows the high frequency lenses to be utilized for extremely wide horizontal coverage, often even eliminating the need for front-fills.

Integrated Dampers

The rear output of the woofers enters a vented enclosure that features integrated damper structures that enhance midrange clarity along with extensive bracing for minimal resonance. The vents are perpendicular to the cone movement to further improve midrange clarity, minimize cabinet frontal area and to provide for wider horizontal coverage capability, all while they do their primary duty of delivering exceptional low frequency performance. Their location also provides the secondary function of ducting cool air directly over the low-frequency driver motors for reduced thermal compression and improved reliability.

The entire BASSBOSS team has been great. David Lee took the time to speak with me at length by phone prior to my purchase, and his team has reached out to me since to check on things a few times. 5-Star treatment for sure.

Phase Aligned

Fixed-Point Fly ware ensures absolutely consistent box-to-box alignment. The high-frequency output of an array can only remain coherent at higher frequencies if the cabinets cannot move front-to-back once the pins are inserted. The MFLA’s unique precision alignment mechanism prevents movement in the direction that influences time domain alignment, front-to-back, which is critical to ensure the phase of the high-frequency signals remain coherent from box to box. This feature dramatically improves the very high-frequency propagation effectiveness of the entire array, allowing the MFLA to deliver pristine highs at greater distances.

Fly Ware That’s Fly

The MFLA Fly ware features a simultaneous compression and tension mechanism, allowing the cabinets to be flown or ground stacked using the same simple setup. The proprietary fly ware design ensures there is no slack and no shifting in the box alignment once the boxes are pinned. The mechanism allows for single-handed adjustment of splay angles for ground-stacked operation or in preparation for flying.

Product Specifications:

Loudspeaker Description: Horizontally Symmetrical Dual 12”, Self-powered, Vented Line Array element with Pressure-Phase Distributed midrange loading and isophase high-frequency wave guides.

Frequency Response (±3 dB): 60-18,000Hz

Maximum Sustained Output: 136dB

Max SPL (Peak): 139dB

Nominal Dispersion (H° x V°): 120 x 10

Amplification: 3000-Watt EIAJ Class D Amplifier

Processing: Integrated Comprehensive DSP including High Pass, Low Pass, Phase Alignment, EQ and Limiting

Transducer (Low Frequency): 2 x 12 in. diameter (300mm) Neodymium motor woofer with 3.5 in. (88mm) voice coil, waterproof cone

Transducer (High Frequency): 2 x 1.4 in. (36mm) exit compression drivers with 3 in. (76mm) voice coils mounted to isophase wave guides

Cabinet Construction: CNC machined 15mm multi-ply laminate with extensive bracing and dado joinery. External fly ware and linking mechanism

Dimensions (HxWxD): 16.125 in. x 40.5 in. x 20.375 in. (Including fly ware)

Net Weight: 104 lbs

Shipping Weight: 130 lbs