Description
The AKG C104 is a professional large-diaphragm cardioid electret condenser microphone designed for modern content creators, podcasters, musicians, streamers, and home recordists. Its 22 mm nickel-sputtered diaphragm and cardioid pickup pattern provide detailed, focused audio capture while helping reduce unwanted sound from the sides and rear.
The microphone uses transformerless FET circuitry to deliver excellent clarity, low noise, and high headroom across a wide dynamic range. With a maximum SPL of 143 dB, the C104 can confidently capture everything from quiet speech and vocals to loud electric guitar amplifiers without distortion. Its 20 Hz–20 kHz frequency response preserves the natural character and detail of recorded sources.
The C104 also combines professional performance with a modern, environmentally conscious design. Its microphone body is constructed from 100% recycled PIR metals and alloys, while the accessories and packaging are designed with reduced environmental impact in mind. With 48V phantom-power operation, a locking XLR output, and a compact side-address design, the AKG C104 is a versatile solution for professional and home recording environments.
Product Specifications:
Microphone Type: Broadcast/Podcast / Large-Diaphragm Condenser
Element Type: 22 mm Electret Condenser
Polar Pattern: Cardioid
Sound Field: Mono
Diaphragm Size: 22 mm (0.9")
Orientation: Side Address
Circuitry: Solid-State FET
Frequency Response: 20 Hz–20 kHz
Maximum SPL: 143 dB SPL at 0.5% THD
Sensitivity: 13.5 mV/Pa (-37.5 dBV)
Equivalent Noise Level: 14 dB (A) SPL
Signal-to-Noise Ratio: 80 dB re 1 Pa
Electrical Impedance: ≤200 ohms
Recommended Load Impedance: ≥1,000 ohms
Phantom Power: 48V ±4V
Current Consumption: ≤5 mA
Output Connector: 3-pin XLR Male, Locking
Mounting Thread: 5/8"-27 Female
Operating Temperature: -5 to 50°C (23 to 122°F)
Included Accessories: Microphone Stand Adapter
Product Weight: 0.83 lbs
Product Dimensions: 6.2" L × 1.9" W × 1.4" H
Shipping Weight: 2.00 lbs
Shipping Dimensions: 8.2" L × 3.9" W × 3.4" H