Description
The Audio-Technica ATW-R3210EE1 is a fourth-generation 3000 Series UHF wireless receiver designed for professional audio applications requiring reliable wireless transmission and flexible frequency management. Featuring true-diversity reception and a wide 60 MHz tuning range, it offers 2,400 selectable frequencies to help users find a suitable channel in congested RF environments. The receiver is compatible with the ATW-T3201 bodypack transmitter and ATW-T3202 handheld transmitter, both sold separately.
An automatic frequency scan searches for available frequencies, while pre-coordinated frequency groups simplify setup when multiple wireless channels are used together. The receiver also supports advance selection of a backup frequency, allowing users to switch quickly if interference occurs. Its dual-mode OLED display provides information about RF signal strength, operating frequency, audio modulation, transmitter battery status, and mute status. Front-panel controls allow settings to be adjusted and locked to prevent accidental changes during operation.
Built into a rugged metal chassis, the ATW-R3210EE1 is suitable for portable equipment racks, permanent installations, theaters, houses of worship, educational facilities, corporate presentations, and live music stages. The half-rack design supports installation in a standard 19-inch rack using the included mounting hardware. Balanced XLR and unbalanced 1/4-inch outputs provide flexible connections to mixing consoles, PA systems, and other audio equipment. Optional remote antennas and antenna distribution equipment can further expand system flexibility.
Key Features
- Analog UHF wireless receiver with true-diversity reception.
- Wide 60 MHz tuning bandwidth with 2,400 selectable frequencies.
- Compatible with ATW-T3201 bodypack and ATW-T3202 handheld transmitters.
- Automatic frequency scanning for interference-free channel selection.
- Dual-mode OLED display with RF and audio monitoring.
- Supports up to 40 simultaneous channels per frequency band, subject to regional restrictions.
- Balanced XLR and unbalanced 1/4-inch audio outputs.
- Rugged metal chassis with removable antennas and half-rack mounting hardware.
- Backup frequency selection for quick recovery from interference.
- Compatible with optional remote antennas and antenna distribution systems.
Ideal For
- Live concerts and stage productions.
- Theaters and performance venues.
- Houses of worship.
- Corporate presentations and conferences.
- Educational facilities and lecture halls.
- Professional AV installations.
- Multichannel wireless microphone systems.
What's in the Box
- 1 × Audio-Technica ATW-R3210 wireless receiver.
- 2 × Flexible UHF antennas.
- 1 × AC power adapter, depending on country or region.
- 1 × Rack-mount adapter kit with mounting hardware.
Inputs & Outputs
- Balanced Audio Output 3-pin XLR output, maximum level +14 dBV.
- Unbalanced Audio Output 1/4-inch (6.3mm) output, maximum level +8 dBV.
- Antenna Inputs Two BNC-type, 50-ohm antenna connections.
- Antenna Power Output 12V DC, 160 mA combined, for compatible active antenna equipment.
- Power Input 12V DC, 1A, center-positive.
- Ground Lift Rear-panel switch to help reduce ground-loop hum.
Frequently Asked Questions
Does the ATW-R3210 include a transmitter or microphone?
No. The ATW-R3210 is a receiver-only product. Compatible ATW-T3201 bodypack and ATW-T3202 handheld transmitters must be purchased separately.
How many wireless channels can operate simultaneously?
Up to 40 channels per frequency band may be used, depending on regional regulations, frequency band, and coordination requirements.
Can the receiver be installed in an equipment rack?
Yes. The receiver supports half-rack mounting in a standard 19-inch rack using the included rack-mount hardware.
Can remote antennas be connected?
Yes. The BNC antenna inputs support compatible remote antenna systems. Optional ATW-A49 directional antennas and RF distribution equipment can be used to extend system flexibility.
What does true-diversity reception do?
True-diversity reception compares signals received through two independent receiver circuits to help maintain a stronger, more reliable wireless connection.
Full Technical Specifications
General Specifications
|
Product Model |
ATW-R3210EE1 |
|
Series |
Audio-Technica 3000 Series, fourth generation |
|
Device Type |
Wireless receiver |
|
Wireless Technology |
Analog UHF |
|
Frequency Band |
EE1: 530–590 MHz |
|
Other Available Frequency Bands |
DE2, EE1, EF1, FG1, GH2, HH2, subject to regional availability |
|
Tuning Bandwidth |
60 MHz |
|
Number of Selectable Frequencies |
2,400 |
|
Minimum Frequency Step |
25 kHz |
|
Modulation Mode |
FM |
|
Maximum Operating Range |
100 m / 328 ft |
|
Maximum Simultaneous Channels |
Up to 40 per band, region dependent |
|
Operating Temperature |
-5°C to +45°C |
Receiver Specifications
|
Receiver Type |
Tabletop / rack-mountable |
|
Receiving System |
True diversity |
|
Number of Audio Channels |
1 |
|
Sensitivity |
20 dBµV at 60 dBA S/N ratio, 50-ohm termination |
|
Frequency Response |
31 Hz–15.5 kHz, depending on transmitter and microphone |
|
Maximum Balanced Output |
+14 dBV, XLR |
|
Maximum Unbalanced Output |
+8 dBV, 1/4-inch |
|
Gain Range |
-60 to 0 dB in 2 dB steps |
|
Display |
Dual-mode OLED |
|
Frequency Scanning |
Automatic frequency scan |
|
Frequency Coordination |
Pre-coordinated frequency groups |
|
Backup Frequency |
Supported |
|
Settings Lock |
Yes |
|
Antenna Inputs |
2 × BNC, 50 ohms |
|
Antenna Power |
12V DC, 160 mA combined |
|
Ground Lift |
Yes |
|
Mounting |
Half-rack, 19-inch rack compatible |
Power Specifications
|
Power Supply |
External AC/DC adapter |
|
AC Input |
100–240V AC, 50/60 Hz |
|
DC Output |
12V DC, 1A |
|
Polarity |
Center-positive |
|
Power Adapter |
Included, country dependent |
Physical Specifications
|
Chassis Construction |
Rugged metal |
|
Antennas |
2 flexible UHF antennas, removable |
|
Dimensions (W × D × H) |
8.27 × 7.52 × 1.71 inches |
|
Product Weight |
2.43 lbs (1,100 g), without accessories |
|
Package Weight |
4.855 lbs |
|
Box Dimensions (L × W × H) |
15.1 × 12.7 × 4 inches |



