Behringer 911A Dual Trigger Delay, Legendary Analog Dual Trigger Delay Module For Eurorack

Enter the Behringer 911A DUAL TRIGGER DELAY. An authentic reproduction of the circuitry from the “Modular 55” series used by the world’s most famous pop, rock, and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that’ll fulfill any synth geek’s wildest dreams.

Controls

The 911A comes with two delay triggers with their own delay time controls ranging from 2 ms up to 10 seconds and their own 3.5 mm S-Trig ins and outs. Connect the 911A to the Behringer 911 ENVELOPE GENERATOR module and turn your Attack/Decay/Sustain/Release (ADSR) module into a Delay/Attack/Decay/Sustain/Release (DADSR) module. Rather than just playing the note when the signal is triggered, the 911A creates a nice volume swell effect, rising from 0 until the peak volume than going through the rest of the phases set in the envelope generator.

Coupling

The delays in the 911A can be coupled in three different ways. In the Offsetting, the delays are triggered separately via the trigger inputs. In Parallel mode, the trigger connected to the input at the top section will activate both delays at the same time. Switching the knob to Series will trigger the top section first then the lower section after.

Eurorack Ready

Installing the 911A is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 911A to be mixed with other synth modules for a truly unique set up.

Complete Your Collection

Whether you’re just getting into modular synths or looking to complete your collection, the 911A DUAL TRIGGER DELAY module from Behringer is a great tool to have when creating amazing music.

Product Specifications:

Trigger Input Type: 3.5 mm jack, DC-coupled

Impedance: 9 kΩ, unbalanced

Maximum Input: level +11 V

Trigger Operation:  Active low, hold low until the delay time is completed

Trigger Output Type: 3.5 mm jack, DC-coupled

Impedance: 20 Ω to ground when, enabled, unbalanced

Maximum Output Level: +11 V

Trigger Operation: Active low

Control Delay Time:  2 ms - 10 s

Coupling Mode: Off, parallel, series

Power Supply: Eurorack

Current Draw: 6 mA (+12 V), 16 mA (-12 V)

Dimensions: 38 x 40 x 129 mm (1.5 x 1.6 x 5.1")

Rack Units: 8 HP

Weight: 0.1 kg (0.22 lbs)