B-Stock: Palmer River Havel Active DI Box for Guitar, Bass and Keyboard Instruments

The Palmer River Havel, Active DI Box offers the best solution if you are looking to pick up a pure guitar, bass, or electric piano signal with all its brilliance and without any tonal alterations. as long as it has the same high-quality construction as the Palmer Havel. The Havel’s low-noise active circuitry allows a higher input impedance than a passive DI box. This means the sound of the instrument is captured without treble or bass losses. High-level input impedance is especially important in interaction with the magnetic pickups in electrical guitars, electric basses and electromechanical electric pianos (e.g., Rhodes), as well as with (passive) piezo pickups for acoustic instruments. However, the Palmer Havel is also very well suited to synthesizers and other electronic keyboards, since it offers enough headroom to handle even high-level inputs without unwanted distortion. 

Of course, the Palmer Havel features a THRU output to pass the input signal on to the instrument amplifier. With 30 dB of pre-attenuation activated, the Palmer Havel can also be looped in between the amplifier output and the loudspeaker, if you want to include the sound of the amplifier instead of the “raw” instrument signal.

The balanced, low-impedance output signal from the Palmer Havel is resistant to interference, which enables long cable runs without any loss of sound quality. Thanks to the built-in transformer, the XLR output is galvanically isolated. Any hum loops that may occur can easily be remedied by pressing the ground lift switch. For a power supply, a 48V phantom power unit or a standard 9V battery can be used.

We're sure you’ve spent a long time searching for Your sound, and have invested a lot of time and money to get your instrument to sound the way it should. The Palmer Havel transmits your sound faithfully and free of interference. This means your sound reaches the listener exactly as nature intended!

B-stock may have minor cosmetic scratches or dents and furthermore B-Stock is not covered by full manufacturer warranty. Please call for details.

Product Specifications:

Type: Active

Included Accessories: Rubber feet, Tour label

Isolated transformer: Yes

Transformer Ratio: 1:1

Ground Lift: Yes

On/Off switch: No

Frequency response (±1 dB, rel. 1 kHz): 20 - 20,000 Hz

Number of inputs: 1

Number of outputs: 1

Number of channels: 1

Inputs:

Input signal type: Unbalanced

Input connector types: 6.3 mm Jack TS

Number of instrument inputs: 1

Max. input level: 9.5 dBu

Input impedance: 500 kΩ

Input padding: 0 dB, 30 dB

Outputs:

Output signal type: Balanced

Output connector types: XLR 3-pole male

Output impedance: 100 Ω

Linked outputs per channel: 1

Max. output level: 4.5 dBu

Signal processing:

SNR (+4 dBu, 22 kHz BW, unity, unweighted): 105 dB

Max. THD+N (1 kHz, +4 dBu, unity, unweighted): 0.0017 %

Max. THD+N (30 Hz, +4 dBu, unity, unweighted): 0.0026 %

Max. IMD (SMPTE, 7 kHz, 4:1, +4 dBu): 0.0017 %

Max. IMD (SMPTE, 60 Hz, 4:1, +4 dBu): 0.0017 %

Main’s operation:

Operation voltage: 48 V phantom power

Rated power: 0.5 W

Battery operation:

Battery type: 9V block (6LR61)

Number of batteries needed: 1

Built in battery tester: No

Housing:

Chassis material: Aluminum continuous casting

Coating: Powder coated

Colour: Black

Environmental:

Ambient temperature: -20 - 70 °C

Maximum air humidity (non-condensing): 80 %

Shipping Weight: 2 lbs.

Shipping Dimensions: 6 x 3 x 2"