Odyssey FZGSLBM10WR Black Low Profile 10" Format DJ Mixer and Two Battle Position Turntables Flight Coffin Case with Wheels and Glide Platform

The Odyssey FZGSLBM10WR is a low profile Glide Style DJ coffin case that holds one 10-inch format DJ mixer and two turntables in battle position, with a removable laptop platform that slides out over the mixer. It measures about 46 x 23.5 x 9 inches, weighs about 45 pounds, and rolls on built-in wheels, which makes it a one-case setup for scratch and battle DJs.

The turntable wells take decks up to 18.11 x 15 inches, so Technics, Numark, Pioneer, Stanton and similar sized turntables fit. The case is built from 3/8-inch ply with heavy-duty ball corners, recessed latches and spring-loaded handles, and sturdy 90 degree handles on the lid. A removable V-cut front access panel at the mixer section and port holes in the rear and bottom keep cabling clean.

FZGSLBM10WR specifications

Type	Low profile Glide Style DJ coffin flight case with wheels
Holds	One 10-inch format DJ mixer and two turntables in battle position
Turntable wells	Turntables up to 18.11 x 15 in
Mixer well	Mixers 8.5 to 10.75 in wide and up to 18 in deep including knobs; well height 3 in
Laptop platform	Patented removable gliding laptop platform
Construction	3/8 in ply, heavy-duty ball corners
Handles and latches	Recessed handles and latches, spring-loaded handles, 90 degree lid handles
Access and cabling	Removable V-cut front access panel, rear and bottom cable port holes
Fit adjustment	Adjustable mixer section width foam strips included
Transport	Built-in roller wheels, bottom rubber feet
Dimensions (edge to edge)	Approx. 46 x 23.5 x 9 in (116.8 x 59.7 x 22.9 cm)
Weight	Approx. 45 lb (20.4 kg)
UPC	807822041361

Which mixers fit the FZGSLBM10WR?

Any 10-inch format mixer from 8.5 to 10.75 inches wide and up to 18 inches deep, including knobs. The mixer well is 3 inches high, and the included foam strips adjust the width to your mixer.

Which turntables fit?

Turntables up to 18.11 x 15 inches. Odyssey says the case takes Technics as well as Numark, Pioneer, Stanton and similar sized turntables.

Can I move the case with my laptop on the glide platform?

No. Odyssey says not to transport gear stored on the glide platform. The platform also comes out when it is slid to its furthest point, and it must be seated back in its rails before you close the case.

What is the difference between FZGSLBM10WR and FZGSLBM10WRBL?

The hardware. Odyssey lists the same 46 x 23.5 x 9 inch size, 45 pound weight and wells for both; the FZGSLBM10WRBL adds all black anodized and powder coated hardware. This listing is the FZGSLBM10WR.

FZGSLBM10WR or FZGS1BM10W?

The FZGSLBM10WR holds two turntables and a mixer, measures about 46 x 23.5 x 9 inches and weighs about 45 pounds. The FZGS1BM10W holds one turntable and a mixer, with the mixer on either side, measures about 32.75 x 21.25 x 10 inches and weighs about 41 pounds. Both take the same 10-inch mixers and turntables up to 18.11 x 15 inches.

The turntables, mixer, laptop and other gear shown in photos are not included. Browse more Odyssey DJ coffins and coffin cases.