Pioneer Pro XY-1 Dual 12" Hybrid Loaded LF Loudspeaker

The Pioneer Pro XY-1 Dual 12" Hybrid Loaded LF Loudspeaker consists of two 12-inch custom drivers in a hybrid dual-chamber configuration exactly the same as the XY-3B, maintaining the chest-pumping low end of the flagship model. These adaptable new additions to the XY Series can also be used as stage fills, for live PA and DJ booth monitoring, thanks to the tailor-made accessories that make them easy to deploy in tight spaces.

Hybrid Low-Mid Section

A hybrid dual 12-inch chamber in the low-mid section enables the drivers to produce precise notes. Water-resistant treatment allows the LF drivers to deliver a natural tightness rather than using thicker speaker cone material which would add weight and slow down the speed of the cones.

Suitable for Various Configurations

The XY-1 and XY-2E can be quickly and easily deployed in a variety of fixed install and touring scenarios enabling numerous flying and ground stacking configurations. Deploy from low ceilings in single units or horizontal arrays using the CP-XY1VC1 flying cradle or the CP-XY1DF1 jointing plate respectively. Or create an array of up to nine speakers – 3 x 3 – using a combination of CP-XY1DF1 cradles and CP-XY1CON1 plates. Additionally, integrate the XY-2 underneath the XY-1 and XY-2E arrays for increased MHF coverage.

 Impact-Resistant Finish

The new loudspeakers are housed in robust wooden enclosures – ideal for guarding against bumps and scrapes on the road and in tight spaces. The black units also feature an elastothane coating for weather resistance and extra protection against impact.

Product Specification:  

Loudspeaker Type

Dual 12” hybrid loaded LF loudspeaker

Enclosure

15 mm / 0.6" birch plywood

Finish

Impact and weather resistant textured polyurethane paint,

Frequency response (+/ -3dB)

55 Hz–400 Hz (-10 dB @ 45 Hz)

Measured on-axis at 2m in an anechoic environment and referenced to 1m.

Sensitivity (1W/1m)

102 dB

Measured in half space at 2m with 4W sine wave input and referenced to 1m

Nominal Impedance

4 Ω

Power Handling AES

1400 W RMS, 5600 W Peak

AES Standard ANSI S4.26-1984.

Power Handling (RMS/Program)

133 dB (cont.), 139 dB (peak)

Calculated at 1m, and verified by subjective listening test of familiar program material.

Maximum SPL

12” neodymium cone driver x 2

Driver Configuration

Neutrik speakON™ NL 4 x 2

Dimensions ( W x H x D)

530 x 578 x 540 mm / 20.7" x 22.8" x 21.3"

Weight

34.0 kg / 74.9 lb

Environmental

 PT-XY3LF1- LF driver