Radial Engineering SGI RX Stereo Remote Receiver for Guitar Line

The Radial Engineering SGI RX Stereo is the receiver unit of the SGI Stereo system, designed to deliver high-performance stereo line signal reception for guitars and other instruments. Paired with the SGI TX Stereo transmitter, the RX unit receives balanced audio signals over a single standard Cat5 Ethernet cable, allowing signal transmission up to 100 meters (300 ft) without noise or signal loss. Featuring locking RJ45 etherCON connectors compatible with Neutrik standards, the SGI RX Stereo ensures reliable connections for stereo rigs, making it ideal for use with dual amplifiers on large stages or in studio environments.

Equipped with L/R Guitar outputs and Thru-puts, the SGI RX Stereo allows you to send signals directly to amplifiers, pedals, or local DI systems while maintaining pristine audio quality. The RX unit also includes ground lift switches to eliminate hum caused by ground loops and a 180° polarity reverse switch for the left channel to correct phase issues in amplifier setups. This combination of features ensures clean, accurate signal delivery, even in complex or extended setups, and simplifies the connection of your stereo guitar rig.

Perfect for both studio and stage applications, the SGI RX Stereo enables flexible and convenient routing. In the studio, it allows you to monitor your guitar or pedalboard directly through the control room while keeping cabling neat and signal pristine. On stage, it balances high-impedance signals from pedalboards, isolation cabinets, or under-stage amps, providing noise-free performance and allowing you to drive multiple amplifiers in stereo across large distances. The SGI RX Stereo is a versatile solution for managing complex guitar setups while preserving tone and reliability.

Product Specifications:

Product Type: Stereo guitar line driver receiver

System Configuration: Part of the SGI Stereo system (works with SGI Stereo TX)

Channels: 2 (Stereo Left / Right)

Inputs: Locking RJ45 etherCON input (receives balanced signals from SGI TX via single Cat5 Ethernet cable

up to 100 m / 300 ft)

Outputs: L/R 1/4" guitar outputs to amplifiers or pedals; L/R Hi-Z 1/4" thruputs for feeding local amplifiers

or direct boxes

Connectors: 1/4" TS instrument jacks, RJ45 etherCON (compatible with Neutrik etherCON locking

connectors)

Controls & Features: L/R Ground Lift switches to reduce ground loop hum; 180° Polarity reverse switch for

Left output to correct signal cancellation on amplifiers wired out of phase; Maintains pristine tone over long

cable runs

Power Requirements: Powered via SGI TX (balanced transmission over Cat5); compatible with 9–18 VDC

supplies

Audio Format: Analog audio transmission

Shipping Weight: 2.35 lbs

Shipping Dimensions (L x W x H): 6.25” x 4” x 3”