Shure SM7B Podcast Package - with Mic Booster and Desktop Boom Stand - FetHead + GFWMICBCBM3000

This desktop microphone package comes with 1 Shure SM7B Cardioid Dynamic Studio Vocal Microphone, 1 Triton Audio FetHead Preamp for Ribbon and Dynamic Microphones, and 1 Gator Frameworks GFWMICBCBM3000 Deluxe Desktop Mic Boom Stand for Podcasts and Recording.

1 Shure SM7B Cardioid Dynamic Studio Vocal Microphone

The SM7B is the preferred mic Joe Rogan and other podcasters use daily. It's also a professional vocal mic for singing and book on tape recordings where you want to sound your best. Rich warm vocal recordings in close-proximity studio applications.

The SM7B is a selectable frequency response microphone that delivers warm and smooth audio in close-proximity studio and vocal applications. Optimized shielding from the external electromagnetic hum, along with internal shock mounting, external windscreens, and adjustable bass roll-off and midrange emphasis response settings provide clean, consistent reproduction.

Whether it is broadcast, podcast or recording, voices need to be handled with care. When purified and polished, every detail has more impact. That is why the SM7B was built, to capture smooth, warm vocals that connect the speaker to the listener.

How It Works

The wide-range frequency response of the SM7B preserves the natural beauty of the sound it captures. With its detailed audio profile, words may travel far, but they always arrive at their destination with quality and clarity intact.

Only Good Air Gets Through

The air suspension shock isolation and the pop filter eliminate both mechanical noise and breathiness. So, words get through and the rest stays out of the mix.

Uniform Capture

The classic cardioid pattern is designed to reject off-axis audio. So, you can sing or speak at a comfortable angle and it captures the sound, just as you want it, with minimum coloration.

Shield Your Sound

We added advanced electromagnetic shielding to defeat hum from computer monitors and other studio equipment.

Product Specifications:

Type: Dynamic

Frequency Response: 50 to 20,000 Hz

Impedance: 150 ohms for connection to microphone inputs rated at 19 to 300 ohms.

Switches: Bass roll-off and mid-range emphasis: Slotted response selector switches.

Microphone Connector: Three-pin professional audio (XLR)

Weight: 765.4 grams (1 lb, 11 oz)

1 Triton Audio FetHead Preamp for Ribbon and Dynamic Microphones

The Triton Audio FetHead is a Preamp for Ribbon and Dynamic Microphones is an ultra-low noise, high quality, in-line microphone preamplifier. It provides improved sound for ribbon and dynamic microphones. Small, compact, but, powerful, Fethead utilizes tried and true FET technology to deliver up to 27dB of clean boost. No more cranking your mic preamp and adding unwanted noise to get your microphone to an acceptable volume. Boost your microphone.

Operation

Your Fethead will latch straight onto any XLR equipped microphone, or anywhere else in the signal path between microphone and preamp/mixer.  The electronics are housed in a robust metal chassis with a balanced female XLR input and a balanced male XLR output, rugged enough for use at home, in the studio or on tour.

Which Microphones Benefit

We noticed an improvement on all tested microphones. A Shure SM57 for instance sounds more responsive over a broader frequency range. When mated with a high-end dynamic microphone like a Sennheiser MD441, or Shure SM7 our FetHead really shines.

Ribbon microphones benefit greatly too because of a much better impedance match.  Fethead reduces the load on the microphone, giving it better transient response characteristics. FetHeads low noise signal amplification also extends the usable range of a ribbon microphone, making it more suitable to capture softer sound sources.

Protects the Microphone

Some older ribbon microphones do not tolerate phantom power. Fethead uses phantom power to power its circuitry but doesn’t pass phantom power to the microphone, so rest assured your ribbon mics are safe.

Product Specifications:

Accessory Type: Pre-Amplifier

Number of Channels: 1

Gain: +27 dB (3-Kilohm Load)

Circuit Type: Class-A JFET

Operating Voltage: 28 to 48 V (Phantom Power

Balanced: XLR input/output

Frequency Response: 10hz-100khz (+/- 1dB)

1 Gator Frameworks GFWMICBCBM3000 Deluxe Desktop Mic Boom Stand for Podcasts and Recording

Desk-Mounted Broadcast Microphone Boom Stand for Podcasts & Recording. Fixed, Internally Guided 10’/3.05m XLR Cable Included. Rotates Full 360-Degrees with Minimal Noise. Multiple Knobs for Securing Mic at Desired Angle.

Spring-Loaded Articulating Arm with 4.4 lbs./2 kg Max Weight Capacity & 32.25”/940mm Max Extension. Easily Mounts or Clamps to Desks, Tables & Similar-Sized Surfaces 2.17”/55mm Max in Thickness. Black Powder-Coated Steel Construction with Metal Coil Springs.

Product Specifications:

Min Height: 16"

Max Height: 17.25"

Weight Capacity: 4

Ext Width: 4.75"

Ext Height: 2.5"

Weight: 3.4lbs