The Yorkville CA1 is a Coliseum Series installation amplifier offering six input channels, four output zones, and straightforward controls for versatility and ease of use in restaurants and retail environments as well as houses of worship, offices, and conference rooms. With 180W of output power, it can drive a 4-ohm speaker load or four 70V speaker systems while a dedicated preamp out can feed a subwoofer or an audio recorder. Its wide range of inputs include a front-panel 1/4" mic input with voice priority, three XLR-1/4" combo mic/line inputs with selectable 24V phantom power for podium/lavalier condenser microphones, two stereo RCA inputs with 4-stage sensitivity selection, and a dedicated 600-ohm telephone input. In addition to having screw terminals to accommodate hookup of constant-impedance or constant-voltage speakers, the CA1 provides a 1W / 8-ohm auxiliary loudspeaker output and a front-panel 1/4" monitor output.
Product Specification:
Number of Channels: 6
Inputs - 1/4" / XLR Combi: 3
Inputs - RCA (unbal): 2
Phantom Power: Yes
Headphone Monitor Features: Yes - main Output
Record Outputs: Yes
Mixer - Signal to Noise Ratio (dB): Greater than 55dB
Mixer - Freq Resp (Tone and EQ Flat,2dB): 50 - 15kHz
Amp A - Power Output @ 4 Ohms: 180 Watts
Amp A - Power Output –other: 180 Watts 70-volts
THD - 1kHz (dB): Less than 1%
Cooling: Passive
Finish: Black
Chassis Construction: Steel
Rackmount: Yes
Other Features: Zone Paging / Telephone interface
Dimensions (DWH, inches): 12 x 19 x 6
Dimensions (DWH, cm): 320 x 480 x 150
Weight (lbs/kg): 24 / 9
Skip to content
