Description
The Zero Cable Cover for the Pioneer DJ DJS-1000 is a rear-panel cable hider for the DJ booth. It is a molded shell that drops over the back of the DJS-1000, hides the connector panel and the cable tails behind it, and takes every lead out through one integrated channel. Outside dimensions are 12.01 x 3.54 x 6.10 in (305 x 90 x 155 mm), and it is made in Germany from ABS and premium acrylic.
The point of it is cable management that holds up through a real night. With the leads captured in a single channel, the rear connectors are shielded from cable movement and accidental unplugging, and from the light splashes that happen around a working booth. The matte black finish sits back into the equipment instead of drawing the eye, and the flat top panel is a ready-made surface for a logo, an artist name, or a rental asset tag.
Is this a cable hider for a DJ booth?
Yes. It is purpose-built cable management for the back of a DJS-1000: the connector panel and the cable tails sit inside the shell, and the leads leave through one integrated channel instead of fanning out across the booth. It is not an adhesive cord raceway for a wall or a desk.
What does it fit?
The Pioneer DJ DJS-1000, and nothing else in the range. Zero Cable cuts a separate part per model because the shell has to sit flush against that specific rear panel, so a cover for a different player will not seat correctly.
Standard cover or XXL: which one do I need?
Depth is the only difference. The standard cover is 6.10 in (155 mm) deep and hides the connectors and the cable tails. The XXL is 8.86 in (225 mm) deep and adds room behind the player for a power strip, a network switch and power adapters. Same width, same height, same fit. Take the standard for a mobile rig you strike every night, and the XXL for an install or a rental booth where the distribution gear has to live somewhere.
Can I put my logo on it?
Yes. The top panel is flat and unbranded, which is why rental companies and venues use it for an asset tag, a venue logo or an artist name. It takes vinyl or a printed decal.
Is the DJS-1000 included?
No. The gear shown in the photos is there to show the fit. You are buying the Zero Cable cable cover only.
Specifications
| Brand | Zero Cable |
|---|---|
| Product type | Cable Cover with integrated cable channel |
| Fits | Pioneer DJ DJS-1000 |
| Part number | H-ZERO-COVERPIO1000 |
| Material | ABS with premium acrylic |
| Color | Black, matte |
| Cable management | Integrated cable channel |
| Connector protection | Shields rear connectors from cable movement, accidental unplugging and light splashes |
| Width | 12.01 in (305 mm) |
| Height | 3.54 in (90 mm) |
| Depth | 6.10 in (155 mm) |
| Installation | Drops on and lifts off, no tools |
| Made in | Germany |
Other Zero Cable parts for this booth