Description
The QSC CB10 (CB10, CB-10, CB 10) is a battery-powered two-way PA speaker with a 10-inch woofer, a 1-inch compression driver, 440 watts of peak Class D power and up to 12 hours of play per charge. It reaches 127 dB peak SPL, streams over Bluetooth 5.1 with True Wireless Stereo, and has a built-in 3-channel mixer, so DJs, musicians and presenters can run a full set with no wall outlet.
Inputs are two locking XLR/¼-inch combo jacks (Line, and Mic/Line, each with Mic Boost), a 3.5 mm stereo input and Bluetooth, plus a ¼-inch footswitch jack and an XLR Mix Output. The QSC Loudspeaker Control app adds presets, EQ, reverb, a ducker, output routing and firmware updates. The 97 Wh lithium-ion battery swaps out without tools, charges in about 4 hours, and charges while the speaker plays on AC.
How long does the CB10 battery last?
Up to 12 hours, with a charging time of about 4 hours. The battery is a 22.2 V, 4400 mAh, 97 Wh lithium-ion module that you can remove and replace without tools. A spare CB10 battery doubles your runtime for long days. Use only QSC-approved batteries.
Can the CB10 play while it charges?
Yes. Plug in AC and the speaker plays while the installed battery charges. The battery charges whenever AC is connected, even with the power switch off.
Does the CB10 have Bluetooth?
Yes. Bluetooth 5.1 handles both audio streaming and app control, and True Wireless Stereo links up to 4 CB10 speakers at once.
How is the CB10 different from the CP8 and CP12?
The CB10 is the only battery-powered speaker in QSC's lineup. The CP8 and CP12 have more amplifier power but run on AC only and have no Bluetooth.
| CB10 | CP8 | CP12 | |
|---|---|---|---|
| Woofer | 10-inch | 8-inch | 12-inch |
| Peak power | 440 W | 1000 W | 1000 W |
| Max SPL (peak) | 127 dB | 124 dB | 126 dB |
| Frequency response (-6 dB) | 51 Hz to 18 kHz | 56 Hz to 20 kHz | 49 Hz to 20 kHz |
| Coverage | 90° | 90° | 75° |
| Net weight | 26.9 lb | 21.0 lb | 30.3 lb |
| Battery | Up to 12 hours | No | No |
| Bluetooth | Yes, with TWS | No | No |
Is there an app for the CB10?
Yes. The QSC Loudspeaker Control app for iOS and Android sets gain, presets, EQ, reverb, the ducker, contour, output routing, footswitch functions and Bluetooth, and installs firmware updates.
Does the CB10 supply phantom power?
No. The Mic/Line inputs do not provide +48 V phantom power, so use dynamic mics.
Can I use the CB10 on a pole or as a floor monitor?
Yes. Stand it on the floor upright or tilted at 30 degrees as a monitor, or mount it on a speaker stand with the integrated pole cup.
Can I add a subwoofer to the CB10?
Yes. QSC's Acoustic Linear Phase (ALP) integration lets the CB10 combine with QSC subwoofers for more low end. The XLR output can send A only, B only, A+B+C without Bluetooth, or the full mix.
Does the CB10 go to sleep on battery?
After 5 minutes with no signal it goes into standby, and after 30 minutes in standby it enters a low-power mode. You can turn this off in the app, and it never goes to standby while a Bluetooth connection is active.
Is the CB10 weatherproof?
QSC does not publish a weather rating for the CB10 itself. For outdoor use, QSC makes the CB10-CVR weatherized cover.
QSC CB10 specifications
| Configuration | Two-way rechargeable loudspeaker system |
|---|---|
| LF transducer | 10-inch (254 mm) cone |
| HF transducer | 1-inch (25.4 mm) compression driver |
| Frequency response (-6 dB) | 51 Hz to 18 kHz |
| Frequency range (-10 dB) | 47 Hz to 20 kHz |
| Coverage | 90° axisymmetric |
| Maximum SPL | 127 dB peak at 1 m |
| Amplifier | Class D, 440 W peak |
| Cooling | Convection |
| Mixer | 3 channels, 2 x 6-way contour switches, 2 x Mic Boost |
| Inputs | 2 x locking XLR/¼-inch combo (Line; Mic/Line), 1 x 3.5 mm TRS stereo, Bluetooth |
| Outputs | 1 x XLR Mix Output (assignable) |
| Footswitch | 1 x 6.3 mm TS (channel mute, FX mute or channel boost) |
| Bluetooth | 5.1, audio and control, True Wireless Stereo |
| Room delay | Up to 200 ms |
| Battery | Lithium-ion, 22.2 V, 4400 mAh, 97 Wh, user-replaceable (1 included) |
| Battery life | Up to 12 hours |
| Charging time | About 4 hours |
| AC power | 100 to 240 VAC, 50/60 Hz, locking IEC |
| Enclosure | Polypropylene, 18 gauge powder-coated steel grille |
| Mounting | Floor (0° or 30° tilt) or pole cup |
| Color | Black (RAL 9011) |
| Dimensions (H x W x D) | 18.3 x 12.3 x 11.3 in (465 x 313 x 287 mm) |
| Net weight | 26.9 lb (12.2 kg) |
| Shipping weight | 32 lb (14.5 kg) |
| Warranty | 3 years, plus 3 years with registration (6-year warranty); battery 1 year |
Specifications from QSC's CB10 spec sheet, CB10 user manual and CB10 product page.
What's in the box?
The CB10 loudspeaker with 1 battery module, AC power cord, QSC logo decal, QSC limited warranty, CB10 quick start guide and safety sheets.
What else goes with the CB10?
A spare battery, the weatherized cover, or the CB10 kit with covers, cables and stands. Browse QSC speakers and all QSC gear.
Financing Options
Hassle-Free Financing Available
Get the gear you need now and pay over time. Perfect for working DJs, artists, and sound pros who need pro-grade speakers, lighting, and cases to stay competitive.
- Shop Pay & Afterpay for instant financing right at checkout
- Acima, Synchrony, Progressive & Snap lease-to-own and financing options
- Fast approvals so you buy today and pay monthly
Military & First Responder Discounts
We're proud to support those who serve. Active-duty military, veterans, and first responders qualify for a special discount on your gear. See our Military Discount details here and how to redeem.








