Description
The QSC CP8 (CP8, CP-8, CP 8) is a compact two-way powered PA speaker with an 8-inch woofer, a 1.4-inch compression driver and 1000 watts of peak Class D power, rated to 124 dB peak SPL with 90-degree axisymmetric coverage. At 21.0 lb it is built for speech, background music, small live sets and DJ sets in smaller rooms, and for anyone who wants QSC sound in a cabinet that carries with one hand.
Around back are two locking XLR/¼-inch combo inputs (Line on A, Mic/Line on B with a +25 dB Mic Boost for dynamic hand-held mics), a 3.5 mm input for a phone or laptop (summed to mono), and an XLR Mix Output for linking a second speaker. A six-way contour switch sets the voicing: Default, Default Ext Sub, Dance, Dance Ext Sub, Floor Monitor and Speech. The CP8 is convection cooled, so there is no fan noise, and it has a 35 mm pole socket plus an angled back for floor-monitor use.
How is the CP8 different from the CP12, CB10 and K8.2?
The CP8 is the smallest and lightest of the four. The CP12 uses the same 1000 W amplifier and 1.4-inch driver with a 12-inch woofer for more low end. The CB10 adds a battery and Bluetooth. The K8.2 is the 8-inch speaker in QSC's K.2 Series; QSC says K.2 models produce greater acoustic output than comparable CP models.
| CP8 | CP12 | CB10 | K8.2 | |
|---|---|---|---|---|
| Woofer | 8-inch | 12-inch | 10-inch | 8-inch |
| Peak power | 1000 W | 1000 W | 440 W | 1800 W (LF), 225 W (HF) |
| Max SPL (peak) | 124 dB | 126 dB | 127 dB | 128 dB |
| Frequency response (-6 dB) | 56 Hz to 20 kHz | 49 Hz to 20 kHz | 51 Hz to 18 kHz | 59 Hz to 20 kHz |
| Coverage | 90° | 75° | 90° | 105° |
| Net weight | 21.0 lb | 30.3 lb | 26.9 lb | 27 lb |
| Battery | No | No | Up to 12 hours | No |
| Bluetooth | No | No | Yes | No |
Does the QSC CP8 have Bluetooth?
No. Connect a phone, tablet or laptop to the 3.5 mm input instead. It accepts a stereo source and sums it to mono. For Bluetooth in a QSC portable, look at the CB10.
Can I add a subwoofer to the CP8?
Yes. Select the Default Ext Sub or Dance Ext Sub contour, which applies an 80 Hz high-pass filter, and set the sub's crossover to 80 Hz. QSC's KS manual lists the CP8 as OK on a pole over a KS112 or KS212C in vertical or horizontal orientation with the SP-16X, SP-26 or SP-36 pole.
Can the CP8 be used as a floor monitor?
Yes. The cabinet has an angled back that sets a 55-degree wedge angle, and the Floor Monitor contour tunes it for that position.
Can the CP8 be flown or wall mounted?
Not with eyebolts. QSC does not design the CP Series to be suspended from eyebolts. The two M8 threaded inserts are for the optional CP8 yoke only, and the yoke can be attached to a suspended fixture.
Disclaimer: Mount the CP8 only with the QSC yoke and hardware rated for the load, installed by a qualified person, and follow the instructions in QSC's CP Series user manual.
Can I plug a guitar or a condenser mic into the CP8?
No for both. There is no phantom power on the Mic/Line input and no dedicated Hi-Z input. QSC recommends a passive DI box for guitar or bass. Dynamic hand-held mics work well on Input B with Mic Boost on.
Can I link several CP8 speakers?
Yes. Run the Mix Out of one speaker to Input A of the next. QSC recommends no more than 4 loudspeakers (3 daisy chains) to keep the noise floor low.
Is the CP8 weatherproof?
No. The enclosure is not weatherproof. QSC's CP8 Outdoor Cover gives temporary protection for outdoor use.
QSC CP8 specifications
| Configuration | Two-way active loudspeaker |
|---|---|
| LF transducer | 8-inch (203 mm) cone |
| HF transducer | 1.4-inch (35.6 mm) compression driver |
| Frequency response (-6 dB) | 56 Hz to 20 kHz |
| Frequency range (-10 dB) | 53 Hz to 20 kHz |
| Coverage | 90° axisymmetric |
| Maximum SPL | 124 dB peak |
| Amplifier | Class D, 800 W (LF) + 200 W (HF) peak |
| Cooling | Convection (no fan) |
| Inputs | 2 x locking XLR/¼-inch combo (Line; Mic/Line with +25 dB Mic Boost), 1 x 3.5 mm TRS stereo |
| Output | 1 x XLR Mix Output |
| Contours | Default, Default Ext Sub, Dance, Dance Ext Sub, Floor Monitor, Speech |
| Mounting | 35 mm pole socket; 2 x M8 inserts for the optional yoke |
| Floor monitor angle | 55° |
| AC power | 100 to 240 VAC, 50 to 60 Hz, IEC connector |
| Enclosure | Polypropylene, 18 gauge powder-coated steel grille |
| Color | Black (RAL 9011) |
| Dimensions (H x W x D) | 16.2 x 10.7 x 10.1 in (411 x 273 x 256 mm) |
| Net weight | 21.0 lb (9.5 kg) |
| Shipping weight | 25.5 lb (11.4 kg) |
| Carton (H x W x D) | 14.2 x 14.2 x 19.5 in |
| Warranty | 1 year, plus 5 years with registration within 30 days (6-year warranty) |
Specifications from QSC's CP8 spec sheet, CP Series user manual and CP Series FAQ.
What's in the box?
The CP8 loudspeaker, AC power cord, QSC logo decal, QSC limited warranty, CP Series Quick Start Guide and safety sheet.
What else goes with the CP8?
Add a QSC KS112 for more low end, a SP-26 pole to mount the CP8 over it, or the CP8 yoke for a fixed install. Browse QSC speakers, QSC subwoofers and all QSC gear.
Financing Options
Hassle-Free Financing Available
Get the gear you need now and pay over time. Perfect for working DJs, artists, and sound pros who need pro-grade speakers, lighting, and cases to stay competitive.
- Shop Pay & Afterpay for instant financing right at checkout
- Acima, Synchrony, Progressive & Snap lease-to-own and financing options
- Fast approvals so you buy today and pay monthly
Military & First Responder Discounts
We're proud to support those who serve. Active-duty military, veterans, and first responders qualify for a special discount on your gear. See our Military Discount details here and how to redeem.



